• Oceaneering Subsea Pipe Tie In with Horizontal Connection

    published: 20 Oct 2016
  • How a Canadian company will mine the sea bed near Papua New Guinea

    Canadian mining company Nautilus Minerals has reached an agreement with the government of Papua New Guinea to begin mining an area of seabed believed to be rich in gold and copper ores, according to the BBC. Under the terms of the agreement, Papua New Guinea will contribute $120 million to the operation and receive a 15 percent share in the mine. Environmentalists say the mine will devastate the area and cause long-lasting damage to the environment. The BBC reports that "the mine will target an area of hydrothermal vents where superheated, highly acidic water emerges from the seabed, where it encounters far colder and more alkaline seawater, forcing it to deposit high concentrations of minerals." The report continues: The result is that the seabed is formed of ores that are far ric...

    published: 07 Jun 2014
  • ABB launches world´s most powerful extruded HVDC cable system

    525 kV voltage (previous highest installed 320 kV) sets world record more than doubling power flow to 2600 MW (from 1000 MW) and extending range to 1500 km for more cost effective, efficient and reliable underground and subsea transmission while keeping losses to below 5 percent. Major breakthrough for applications like underground HVDC transmission, sub-sea interconnections, offshore wind integration etc. More information: http://new.abb.com/systems/high-voltage-cables/cables/525-kv-extruded-hvdc-cable-system

    published: 21 Aug 2014
  • Subsea cutting - Husqvarna Special Applications

    Check out how Husqvarna can help and support difficult cutting applications through the Husqvarna Special Applications Team. This case features advanced subsea cutting in Denmark. When an old floating dock sunk during demolition, at a shipyard by the Odense fjord, an advanced salvage project was initiated. Husqvarna’s equipment played a crucial role in the successful rescue mission. With two Husqvarna CS 2512 wire saws, two Husqvarna PP 450 E hydraulic power packs and a total of 520 metres of Husqvarna C 1000 Cobra diamond wire, the subsea cutting mission was completed. For more information, visit our website: http://www.husqvarna.com/int/construction/company/newsroom/husqvarna-newsroom/

    published: 14 Sep 2015
  • Spoolbase Pipeline Fabrication

    An overview of spoolbase pipeline fabrication. Special thanks to the professionals at the Vigra Spoolbase for their participation.

    published: 14 Aug 2012
  • Nautilus Animated Industrial.mp4

    Nautilus Animated Industrial that shows a sterilized version of the Deep Sea mining process.

    published: 01 Oct 2011
  • Greystones Subsea - Reeled Clad Pipeline

    This video details the sequence and processes that are required to produce and install a Subsea Reeled Pipeline.

    published: 14 Jul 2016
  • Typical SPM Installation

    Typical SPM Installation for Dorsea Engineering Sdn,Bhd

    published: 07 Apr 2014
  • Alderley

    An Introduction to Alderley, a leading designer and manufacturer of bespoke metering, hydraulic control systems and produced water treatment solutions.

    published: 27 Jun 2012
  • Aquatic - A quayside transpooling operation

    http://www.aquaticsubsea.com :: Here you can see a standard quayside transpooling operation using a combination of powered reel drive system and powered underoller with a level winder that evenly distributes the product on the reel.

    published: 05 Apr 2012
  • CBUC - Copper Back Up Clamp

    An overview of the CRC-Evans Copper Back Up Clamp or CBUC. The CBUC is used to clamp the pipe ends in place and provide support to the bevel during root bead deposition.

    published: 20 Dec 2012
  • CableRail Surface® installs cable troughs along railway tracks. Fast.

    CableRail Surface® cuts a shallow trench and installs cable troughs along a railway track 300 metres/hour. The troughs can be for copper cables or for HDPE tubes for fibre optics. Fast, safe, precise, versatile and economical, CableRail Surface® from SITS installs cables for railway signalling and for telecommunication. • This animation shows the first phase, in which CableRail Surface® cuts a shallow trench and installs cable trough bodies at 300 metres/hour. • In a second phase, CableRail Surface® lays copper cables or high-density polyethylene (HDPE) tubes for fiber optics in pre-installed troughs and affixes trough covers. All at 300 metres/hour. • In just two passes, CableRail Surface® thus creates a cable artery that protects cables from wrongdoers while keeping cables accessib...

    published: 28 Apr 2015
  • Greystones Subsea - Clad Pipe In Pipe

    This video details the sequence and processes that are required to produce and install a Subsea Clad Pipe in Pipe.

    published: 14 Jul 2016
  • Shark Bites Fiber Optic Cables Undersea 15.8.2014

    Google is reinforcing its underwater fibre-optic cables to protect against future shark attacks Google is reinforcing its private underwater fibre-optic cables with an extra layer of protective material in order to protect its 100,000 miles of cables from sharks. Sharks and other fish are attracted to the cables, thought by some to be due to the electromagnetic signals emitted by the lines, but they are easily damaged. The cables already have existing protective materials designed to shelter them from the various dangers of the environment, but will now be coated with a 'Kevlar-like' material to provide even more protection. Fibre-optic cables are made of strands of glass, and are thus much less durable than copper cables. Google wants to prevent its own cables from sustaining further d...

    published: 15 Aug 2014
  • Cold Spray - Slow Mo Guys - GE

    Subscribe to the GE Channel: http://full.sc/12xcByI See the Slow Mo Guys film GE researchers demonstrate a process called "cold spray", in which metal powders are sprayed at high velocities to build a part or add material to repair an existing part. GE researchers are exploring this 3D painting technology as an alternate way to repair or coat parts involved in oil and gas drilling and turbo machinery. To see the process on film, the Slow Mo Guys spray copper particles 10 times bigger than normally used for this process. GE works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works. Co...

    published: 06 Jan 2014
  • Serial How To Make The Things: How to do the Subsea Installation Eps 1 Segment 2 Of 4

    Dalam episode ini diceritakan pemasangan pipa dibawah laut, segment 3 menceritakan telah tiba di kapal lewek champion Serial How to Make The Things Adalah sebuah program acara TV yang berisi liputan pemrosesan / pembuatan sesuatu yang tidak banyak diketahui oleh masyarakat, mulai dari pembuatan pesawat terbang, panzer, senjata, mobil, proses penambangan, kegiatan offshore, dll. Serial ini merupakan produksi PT. Tender Indonesia (www.tender-indonesia.com) dengan produser Tito Loho.

    published: 25 Jun 2013
Oceaneering Subsea Pipe Tie In with Horizontal Connection

Oceaneering Subsea Pipe Tie In with Horizontal Connection

  • Order:
  • Duration: 3:35
  • Updated: 20 Oct 2016
  • views: 312
videos
https://wn.com/Oceaneering_Subsea_Pipe_Tie_In_With_Horizontal_Connection
How a Canadian company will mine the sea bed near Papua New Guinea

How a Canadian company will mine the sea bed near Papua New Guinea

  • Order:
  • Duration: 1:12
  • Updated: 07 Jun 2014
  • views: 21229
videos
Canadian mining company Nautilus Minerals has reached an agreement with the government of Papua New Guinea to begin mining an area of seabed believed to be rich in gold and copper ores, according to the BBC. Under the terms of the agreement, Papua New Guinea will contribute $120 million to the operation and receive a 15 percent share in the mine. Environmentalists say the mine will devastate the area and cause long-lasting damage to the environment. The BBC reports that "the mine will target an area of hydrothermal vents where superheated, highly acidic water emerges from the seabed, where it encounters far colder and more alkaline seawater, forcing it to deposit high concentrations of minerals." The report continues: The result is that the seabed is formed of ores that are far richer in gold and copper than ores found on land. Mike Johnston, chief executive of Nautilus Minerals told the BBC "that a temperature probe left in place for 18 months was found to have 'high grade copper all over it'." Nautilus announced in April that it had completed its bulk cutter, the first component of its Seafloor Production Tools system, which will be used to mine the seabed. Nautilus also approximately 500,000 square kilometres of "highly prospective exploration acreage" in Papua New Guinea, the Solomon Islands, Fiji, Vanuatu and Tonga, as well as in international waters in the eastern Pacific, the company said in a press release.
https://wn.com/How_A_Canadian_Company_Will_Mine_The_Sea_Bed_Near_Papua_New_Guinea
ABB launches world´s most powerful extruded HVDC cable system

ABB launches world´s most powerful extruded HVDC cable system

  • Order:
  • Duration: 2:31
  • Updated: 21 Aug 2014
  • views: 41891
videos
525 kV voltage (previous highest installed 320 kV) sets world record more than doubling power flow to 2600 MW (from 1000 MW) and extending range to 1500 km for more cost effective, efficient and reliable underground and subsea transmission while keeping losses to below 5 percent. Major breakthrough for applications like underground HVDC transmission, sub-sea interconnections, offshore wind integration etc. More information: http://new.abb.com/systems/high-voltage-cables/cables/525-kv-extruded-hvdc-cable-system
https://wn.com/Abb_Launches_World´S_Most_Powerful_Extruded_Hvdc_Cable_System
Subsea cutting - Husqvarna Special Applications

Subsea cutting - Husqvarna Special Applications

  • Order:
  • Duration: 2:21
  • Updated: 14 Sep 2015
  • views: 1632
videos
Check out how Husqvarna can help and support difficult cutting applications through the Husqvarna Special Applications Team. This case features advanced subsea cutting in Denmark. When an old floating dock sunk during demolition, at a shipyard by the Odense fjord, an advanced salvage project was initiated. Husqvarna’s equipment played a crucial role in the successful rescue mission. With two Husqvarna CS 2512 wire saws, two Husqvarna PP 450 E hydraulic power packs and a total of 520 metres of Husqvarna C 1000 Cobra diamond wire, the subsea cutting mission was completed. For more information, visit our website: http://www.husqvarna.com/int/construction/company/newsroom/husqvarna-newsroom/
https://wn.com/Subsea_Cutting_Husqvarna_Special_Applications
Spoolbase Pipeline Fabrication

Spoolbase Pipeline Fabrication

  • Order:
  • Duration: 9:26
  • Updated: 14 Aug 2012
  • views: 275380
videos
An overview of spoolbase pipeline fabrication. Special thanks to the professionals at the Vigra Spoolbase for their participation.
https://wn.com/Spoolbase_Pipeline_Fabrication
Nautilus Animated Industrial.mp4

Nautilus Animated Industrial.mp4

  • Order:
  • Duration: 4:16
  • Updated: 01 Oct 2011
  • views: 22555
videos
Nautilus Animated Industrial that shows a sterilized version of the Deep Sea mining process.
https://wn.com/Nautilus_Animated_Industrial.Mp4
Greystones Subsea - Reeled Clad Pipeline

Greystones Subsea - Reeled Clad Pipeline

  • Order:
  • Duration: 2:48
  • Updated: 14 Jul 2016
  • views: 290
videos
This video details the sequence and processes that are required to produce and install a Subsea Reeled Pipeline.
https://wn.com/Greystones_Subsea_Reeled_Clad_Pipeline
Typical SPM Installation

Typical SPM Installation

  • Order:
  • Duration: 1:19
  • Updated: 07 Apr 2014
  • views: 6491
videos
Typical SPM Installation for Dorsea Engineering Sdn,Bhd
https://wn.com/Typical_Spm_Installation
Alderley

Alderley

  • Order:
  • Duration: 3:54
  • Updated: 27 Jun 2012
  • views: 1104
videos
An Introduction to Alderley, a leading designer and manufacturer of bespoke metering, hydraulic control systems and produced water treatment solutions.
https://wn.com/Alderley
Aquatic - A quayside transpooling operation

Aquatic - A quayside transpooling operation

  • Order:
  • Duration: 0:46
  • Updated: 05 Apr 2012
  • views: 2012
videos
http://www.aquaticsubsea.com :: Here you can see a standard quayside transpooling operation using a combination of powered reel drive system and powered underoller with a level winder that evenly distributes the product on the reel.
https://wn.com/Aquatic_A_Quayside_Transpooling_Operation
CBUC - Copper Back Up Clamp

CBUC - Copper Back Up Clamp

  • Order:
  • Duration: 12:23
  • Updated: 20 Dec 2012
  • views: 144571
videos
An overview of the CRC-Evans Copper Back Up Clamp or CBUC. The CBUC is used to clamp the pipe ends in place and provide support to the bevel during root bead deposition.
https://wn.com/Cbuc_Copper_Back_Up_Clamp
CableRail Surface® installs cable troughs along railway tracks. Fast.

CableRail Surface® installs cable troughs along railway tracks. Fast.

  • Order:
  • Duration: 1:20
  • Updated: 28 Apr 2015
  • views: 527
videos
CableRail Surface® cuts a shallow trench and installs cable troughs along a railway track 300 metres/hour. The troughs can be for copper cables or for HDPE tubes for fibre optics. Fast, safe, precise, versatile and economical, CableRail Surface® from SITS installs cables for railway signalling and for telecommunication. • This animation shows the first phase, in which CableRail Surface® cuts a shallow trench and installs cable trough bodies at 300 metres/hour. • In a second phase, CableRail Surface® lays copper cables or high-density polyethylene (HDPE) tubes for fiber optics in pre-installed troughs and affixes trough covers. All at 300 metres/hour. • In just two passes, CableRail Surface® thus creates a cable artery that protects cables from wrongdoers while keeping cables accessible for future work. See our website at http://www.sits-france.com. Copyright© SITS.
https://wn.com/Cablerail_Surface®_Installs_Cable_Troughs_Along_Railway_Tracks._Fast.
Greystones Subsea - Clad Pipe In Pipe

Greystones Subsea - Clad Pipe In Pipe

  • Order:
  • Duration: 2:56
  • Updated: 14 Jul 2016
  • views: 65
videos
This video details the sequence and processes that are required to produce and install a Subsea Clad Pipe in Pipe.
https://wn.com/Greystones_Subsea_Clad_Pipe_In_Pipe
Shark Bites Fiber Optic Cables Undersea 15.8.2014

Shark Bites Fiber Optic Cables Undersea 15.8.2014

  • Order:
  • Duration: 1:22
  • Updated: 15 Aug 2014
  • views: 752756
videos
Google is reinforcing its underwater fibre-optic cables to protect against future shark attacks Google is reinforcing its private underwater fibre-optic cables with an extra layer of protective material in order to protect its 100,000 miles of cables from sharks. Sharks and other fish are attracted to the cables, thought by some to be due to the electromagnetic signals emitted by the lines, but they are easily damaged. The cables already have existing protective materials designed to shelter them from the various dangers of the environment, but will now be coated with a 'Kevlar-like' material to provide even more protection. Fibre-optic cables are made of strands of glass, and are thus much less durable than copper cables. Google wants to prevent its own cables from sustaining further damage after seeing underwater surveillance footage of sharks biting the cables. IT Pro has contacted Google for more information on the plans and will update the story as soon as we know more.
https://wn.com/Shark_Bites_Fiber_Optic_Cables_Undersea_15.8.2014
Cold Spray - Slow Mo Guys - GE

Cold Spray - Slow Mo Guys - GE

  • Order:
  • Duration: 3:09
  • Updated: 06 Jan 2014
  • views: 762779
videos
Subscribe to the GE Channel: http://full.sc/12xcByI See the Slow Mo Guys film GE researchers demonstrate a process called "cold spray", in which metal powders are sprayed at high velocities to build a part or add material to repair an existing part. GE researchers are exploring this 3D painting technology as an alternate way to repair or coat parts involved in oil and gas drilling and turbo machinery. To see the process on film, the Slow Mo Guys spray copper particles 10 times bigger than normally used for this process. GE works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works. Connect with GE Online: Visit GE's Website: http://invent.ge Find GE on Google +: http://invent.ge/1dPUUN5 Find GE on Tumblr: http://invent.ge/17syCNf Find GE on Facebook: http://invent.ge/1929rzT Follow GE on Twitter: http://invent.ge/XJAX15 Follow GE on Pinterest: http://invent.ge/16JjInY Follow GE on Instagram: http://invent.ge/1a9XZGb Find GE on LinkedIn: http://invent.ge/1gtUi3e Cold Spray - Slow Mo Guys - GE
https://wn.com/Cold_Spray_Slow_Mo_Guys_Ge
Serial How To Make The Things: How to do the Subsea Installation Eps 1 Segment 2 Of 4

Serial How To Make The Things: How to do the Subsea Installation Eps 1 Segment 2 Of 4

  • Order:
  • Duration: 5:36
  • Updated: 25 Jun 2013
  • views: 1416
videos
Dalam episode ini diceritakan pemasangan pipa dibawah laut, segment 3 menceritakan telah tiba di kapal lewek champion Serial How to Make The Things Adalah sebuah program acara TV yang berisi liputan pemrosesan / pembuatan sesuatu yang tidak banyak diketahui oleh masyarakat, mulai dari pembuatan pesawat terbang, panzer, senjata, mobil, proses penambangan, kegiatan offshore, dll. Serial ini merupakan produksi PT. Tender Indonesia (www.tender-indonesia.com) dengan produser Tito Loho.
https://wn.com/Serial_How_To_Make_The_Things_How_To_Do_The_Subsea_Installation_Eps_1_Segment_2_Of_4
×